Heidenhain’s Iron Hematoxylin Variants

Heidenhain’s iron hematoxylin technique uses two separate solutions for staining. First, an iron mordant is applied, usually ferric ammonium sulfate or ferric chloride. This is followed by a hematoxylin solution. The overstained preparations are then differentiated in the iron mordant solution, often diluted, or in some similar solution. Numerous variations on this theme have been published, most of them staining very similarly, as they differ largely in the concentration of the reagents and the times for which they are applied.

In the chart below it is to be understood that all solids are in grams and all fluids in milliliters. The amounts given are to be dissolved in 100 milliliters of the solvent for each solution. The solvent is distilled water unless otherwise stated.

The term visual in the Differentiate column means to control differentiation microscopically.

Variant Solution (in distilled water unless otherwise stated) Time Differentiate with solution Comment
A B C A B
Heidenhain Iron alum, 2.5% Hematoxylin, 0.5% – ½ – 24 hrs. ½ – 24 hrs. A, visual –
Bütschli Ferric acetate, 2% Hematoxylin, 0.5% – 24 hrs 3 hrs – For protozoa
Diamond Iron alum, 4% Hematoxylin, 0.5% in distilled water with 0.1% tergitol Picric acid, saturated in absolute ethanol 5 min. 5 min. C, 3-5 min. –
Dobell Iron alum, 1% in 70% ethanol Hematein, 1% in 70% ethanol Hydrochloric acid, 0.1% in 70% ethanol 10 min 10 min C, visual For protozoa
Freitas Iron alum, 0.5% in 70% ethanol Hematein, 1% in 60 mL 70% ethanol and 30 mL phosphate buffer pH 7.6 Picric acid, 0.3% in 70% ethanol 1 hr 1 hr C, visual –
French Iron alum, 3.5% in 70% ethanol Hematoxylin, 1% in 98 mL 95% ethanol and 2 mL saturated aqueous lithium carbonate Iron alum, 1% Overnight Overnight C, visual –
Galiano Iron alum, 3% Hematoxylin, 0.2% in acetic acid, 20% aqueous Eosin, 1.5% in acetic acid, 25% aqueous 15 mins until dark C, visual Rinse with 0.1% ammonia in 95% ethanol after solution C
Haggquist Iron alum, 5% Hematoxylin, 1% Ferric chloride, 1% 1 hr 1 hr C, visual –
Hance Iron alum, 2.5% 10% ethanolic hematoxylin, 10 mL in 100 mL distilled water with sodium bicarbonate – ½ – 2 hrs 30 min C, visual Add SB until sol B changes from yellow to a plum color