Basic Fuchsin–Picric Acid
for Elastic


Basic fuchsin
Basic fuchsin 0.5 g
Distilled water 500 mL
Picric acid
Saturated alcoholic picric acid 12 mL
Acetone 1 L

Tissue sample
A 10% Formalin variant is suitable.
Paraffin sections at 5µ are preferred.


  1. Bring sections to water via xylene and ethanol.
  2. Place in basic fuchsin for 1-2 minutes.
  3. Rinse with tap water, then acetone.
  4. Differentiate briefly with picro-acetone until tissue is just decolorised.
  5. Rinse with acetone.
  6. Clear with xylene and mount with a resinous medium

Expected results


  1. The Brown and Brenn picric acetone usually requires weighing semi-dry picric acid. The amount in the saturated ethanolic solution specified above is very close to that and it is a much safer means of compounding the solution.
  2. If you use the Brown and Brenn variant of the Gram stain, the counterstain solutions from that may be used.
  3. Be careful not to overdifferentiate. Apply picric acetone until most of the red is just removed from the background. This takes only a few seconds. It is easy to overdifferentiate.
  4. This method is not meant as a primary means of staining elastic fibres. It can be done very quickly, about 5-10 minutes, and may be useful when time is limited.
  5. Nuclei are not stained.


Personal observation, Bryan D. Llewellyn.

Brown, J H and Brenn, L, (1931),
A method for the differential staining of Gram positive and Gram negative bacteria in tissue sectioons..,
Bull. John Hopkins Hosp., v 48, page 69.




Translate in
Google Translate